PA / NYLONS-Kunststofffolie

PA plastic (nylon, Polyamide) , English name: Polyamide ,mainly have ESD PA SHEET,CONDUCTIVE PA SHEET,PA GF SHEET,FIREPROOF PA SHEET . PA66 plastic material is a translucent or opaque milky white crystalline polymer with plasticity.The main varieties in nylon are nylon 6 and nylon 66 , nylon 6 for polycaprolactam, and nylon 66 for hexamethylene diamine, and nylon 66 is hard l2%.

Model USES:

PA66 USA's first no21 SPC highly rigid chemical resistance

PA66 United States first norr513h R533H glass fiber reinforced, high strength, special thermal stability, resistance to hydrolysis.

Through FDA and UL certification.

Through GM, Ford, Chryster, Delphi, Valeo and other automotive certifications, it is applicable to auto parts.

Mechanical parts, etc.

PA66 Germany basf A3X2G5 A3X2G7 glass fiber reinforced, red phosphorus flame retardant long-term stability, with excellent mechanical properties.

PA66 plastic raw material of Germany basf A3EG6 A3HG5 A3EG7 A3WG6 glass fiber reinforced with mechanical components that require high rigidity and dimensional stability.

PA66 Germany basf C3U high toughness without halogen and phosphorus flame retardant grade.

PA66 - basf A3K high fluidity for high stress engineering components such as bearings, gears and connectors.

PA66 American dupont 101F is a special grade for good heat resistance products.

PA66 plastic raw material American dupont 101L high strength injection molding improved machine feeding and stripping characteristics.

PA66 American dupont 408 hs injection molding grade good stability.

The PA66 American dupont 408L is suitable for high impact impact engineering products.

PA66 plastic material American dupont 42A color, high viscose silk, molecular weight distribution, can be welded to ultrasonic.

The PA66 American dupont 70G13L 70G13L glass fiber reinforced 13% high strength.

PA66 American dupont 70G33L 70G33L high strength glass fiber increased 33%.

PA66 plastic raw materials USA dupont 70G43L high strength 43% glass fiber reinforced.

The PA66 American dupont 80g33hs1-l ultra high impact fiberglass enhanced 33% super strength.

PA66 plastic raw material United States dupont FR15 FR50 FR60 glass fiber reinforced halogen-free flame retardant grade UL94 V-0

PA66 USA dupont ST801 super toughness excellent impact resistance.

Vorteile:

1. hohe Festigkeit und Steifheit;

2. Hochaufprall- und Notching-Schlagfestigkeit;

3. hohe Wärmeablenkentemperatur;

4. Gut bei der Dempenening;

5. Guter Glide und schlaffe Heimatfiguren;

6. Gute chemische Stabilität gegen organische Lösungsmittel und Kraftstoffe;

7. Beständig gegen thermische Alterung (anwendbare Temperatur zwischen -40 ° C und 90 ° C;

8. Größenwechsel durch Feuchtigkeitsabsorption muss berücksichtigt werden.

Disadvantages:

1. Die Wasserabsorptionsrate von Nylon kann bis zu 9% betragen;

2. Physikalische Stabilität ist empfindlich auf Temperatur und Luftfeuchtigkeit;

3. Dimensionsstabilität ist empfindlich auf Temperatur und Luftfeuchtigkeit.

Anwendung:

1. Nylon is widely substituted for wear parts of mechanical equipment, or used as quick-wear parts

der Ausrüstung anstelle von Kupfer und Legierung;

2. Wellenhülse, Lagerbuchse, Futter, Futterplatte, Zahnrad;

3. Schneckengetriebe, Rollenkupferführungsschiene, Kolbenring, Dichtungsring, Gleitblock;

4. Sphärische Schüssel, Laufrad, Klinge, Nocken, Mutter, Ventilplatte,

5. Rohr, Füllkasten, Rack, Gürtelscheibe, Pumpenrotor usw.

Combustion characteristics:   Flame upper yellow, lower end blue, post-combustion plastic dribbling, blistering, special wool after fire, burning of nails and celery.

Specification: the thickness of PA/Nylons Plastic sheet material can be produced from   0.3mm to 1.9mm, the normal width is 600mm, the   width cannot exceed 1200mm, the length is not limited.
The thickness of plate can be produced from 2mm to 180mm, the usual specification of 2-10mm is 1000mm* 2000mm, and the commonly used specification of 10-180mm is 600*1200 mm. PA/Nylons Plastic can also be customized according to requirements, and the width cannot exceed 1200mm, and the length is not limited.and The diameter of the PA/Nylons Plastic   Stange   can be produced from 2mm to 250mm, the   length is 1 meter, and it can be ordered to be more than   3 meters in length.

Color: Black ,white beige and blue, can also be made another color, and the color order is 500KG.

Modified varieties: can be added to the glass fiber, copper powder, and molybdenum disulfide enhancement plate according to customer's requirements.
Add antistatic agent to the permanent plate, the volume resistance value of 10 to the 6 to 9 power.
Add flame retardant to the flame retardant board from UL 94v-0 to HB combustion grade, and other modification requirements are required to customize various additional properties according to the actual use of the customer.

Product certification: most environmental certification reports and safety reports for raw materials, such as   SGS report, CTI report, UL report, MSDS safety informatio n , etc.